BL95A series Copper Brazed plate heat exchanger Heat pump Evaporator and Condenser Alfa laval, SWEP, Danfoss replacement

1.Alfa laval,SWEP,Danfoss replacement 2.Heat pump plate heat exchanger material: Stainless steel AISI 304, 316 3.Copper brazed

BL95A series  Copper brazed plate heat exchanger Heat pump Evaporator and Condenser Alfa laval , SWEP, Danfoss replacement 

Evaporator flow principleThe channels formed between the corrugated plates and corners are arranged so that the two media flow through alternate channels, always in opposite directions (counter current flow). The two phase refrigerant (vapor + liquid) enters the bottom left of the exchanger with a vapor quality depending on the operating condition of the plant. Evaporation of the liquid phase takes place inside the channels and some degrees of superheat are always requested, which is the reason why the process is called "dry expansion". In the enclosed evaporator picture the dark and light blue arrows show the location of the refrigerant connections. The water (brine) to be cooled flows counter current in the opposite channel; the dark and light red arrows show the location of the water (brine) connections.

Standard designThe plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel plates are corrugated to improve heat transfer efficiency and to make them rigid.Standard materialsCover plates: Stainless steel AISI 316Connections: Stainless steel AISI 316Plates: Stainless steel AISI 316Brazing material: CopperParticulars required for quotation

To enable Baode's representative to make a specific quotation, enquiries should be accompanied by the following particulars:– flow rates or heat load required– temperature program– physical properties of liquids in question– desired working pressure– maximum permitted pressure dropAdvantages of brazed plate heat exchangers in Industry and HVAC&RThe Baode Brazed plate heat exchangers (BHE) have several advantages over traditional heat exchangers in Industrial and HVAC&R applications.– The high heat transfer efficiency of the BHE makes it extremely compact and also easy to install in places were space is limited.– The unit has no gaskets and is therefore suitable in applications were temperature and/or pressure is high e.g. in district heating.– The Baode supply system reassures that, no matter were you are on the globe, the BHE units are available with a very short delivery time.

Certified by CE, ISO, UL, WRAS, CCS.

Width	Height	Horizontal  port  distance	Vertical  port  distance	Thickness	Max Plates	Max flowrate  (M3/h)	Weight  (kg)	Heat  exchange  area (m2)	Volume L
191	616	92	519	11+2.35N	200	42	7.0+0.36N	0.095 (N-2)	0.0105 (N-2)

                 

BL95A series Copper Brazed plate heat exchanger Heat pump Evaporator and Condenser Alfa laval, SWEP, Danfoss replacement